You are here

List of Conference Papers

  • Hong, J., Talbot, D., and Kahraman, A., “A Deformable-Body Spline Joint Load Distribution Model,” VDI International Conference on Gears, VDI International Conference on Gears, Munich, Germany, October 7-9 2013.
  • Li, S. and Kahraman, A., “A Micro-Pitting Model for Lubricated Point Contacts,” VDI International Conference on Gears, VDI International Conference on Gears, Munich, Germany, October 7-9 2013.
  • Hotait, M. A. and Kahraman, A., “Estimation of Bending Fatigue Life of Hypoid Gears Using a Multiaxial Fatigue Criterion,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Portland, OR, August 5-7 2013.
  • Talbot, D., Kahraman, A. and Seetharaman, S., “A Pocketing Power Loss Model for Helical Gears,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Portland, OR, August 5-7 2013.
  • Artoni, A., Guiggiani, M., Kahraman, A., and Harianto, J., “Robust Optimization of Helical Gear Surface Modifications within Ranges of Torque and Misalignments,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Portland, OR, August 5-7 2013.
  • Xu, H. Singh, A., Kahraman, A., Hurley, J., and Shon, S., “Effects of Bearing Prelaod, Oil Volume and Operating Temperature on Axle Power Losses,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Washington D.C., August 28-31 2011.
  • Talbot, D., Kahraman, A. and Singh, A., “An Experimental Investigation of the Efficiency of Planetary Gear Sets,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Washington D.C., August 28-31 2011.
  • Sanders, A., Houser, D.R., Kahraman, A., Harianto, J., and Shon, S., “An Experimental Investigation of the Effect of Tooth Asymmetry and Tooth Root Shape on Root Stresses and Single Tooth Bending Fatigue Life of Gear Teeth,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Washington D.C., August 28-31 2011.
  • Kashyap, S., Houser, D.R., Smith, Z., Selvaraj, S., Casella, J., and Bradway, J., “Methods of Describing Plastic Gear Geometry After a Temperature Change with Application to the Prediction of Gear Load Distribution,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Washington D.C., August 28-31 2011.
  • Boguski, B., Kahraman, A. and Nishino, T., “A New Method to Measure Planet Load Sharing and Sun Gear Radial Orbits of Planetary Gear Sets,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Washington D.C., August 28-31 2011.
  • Artoni, A., Gabiccini, M., Guigguani, M., and Kahraman, A., “Multi-objective Ease-off Optimization of Hypoid Gears for their Efficiency, Noise and Durability Performances,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Washington D.C., August 28-31 2011.
  • Xu, H. , Singh, A., Maddock, D., Kahraman, A., and Hurley, J., “Thermal Mapping of an Automotive Rear Axle,” SAE Noise and Vibration Conference, SAE Noise and Vibration Conference, Detroit, MI, April 12-14 2011.
  • Marambedu K.R., Houser, D.R., and Ligata, H., “Microgeometry Modifications for Load Distribution Improvement and Transmission Error Reduction of Loaded Straight Bevel Gears,” VDI International Conference on Gears, VDI International Conference on Gears, Munich, Germany, October 4-6 2010.
  • Hotait M., Kahraman, A. and Nishino, T., “An Investigation of Influence of Misalignments on Root Stresses of Hypoid Gears,” VDI International Conference on Gears, VDI International Conference on Gears, Munich, Germany, October 4-6 2010.
  • Hotait, M., Talbot, D., and Kahraman, A., “An Investigation of the Influence of Shaft Misalignments on Bending Stresses of Helical Gears with Lead Crown,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Las Vegas, NV, September 2010.
  • Li, S., Vaidyanathan, A., Harianto, J., and Kahraman, A., “Influence of Design Parameters and Micro-Geometry on Mechanical Power Losses of Helical Gear Pairs,” JSME International Conference - Motion and Power Transmission, JSME International Conference - Motion and Power Transmission, Sendai, Japan, May 13-15 2009.
  • Singh, A., Kahraman, A., and Ligata, H., “Internal Gear Strains and Load Sharing in Planetary Transmissions – Model and Experiments,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Las Vegas, NV, September 2009.
  • Ligata, H., Kahraman, A, and Singh. A., “Influence of Gear Rim Deflections on Planetary Gear Set Behavior,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, San Diego, CA, September 2009.
  • Kolivand, M. and Kahraman, A., “An Ease-Off Based Method for Loaded Tooth Contact Analysis of Hypoid Gears having Local and Global Surface Deviations,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, San Diego, CA, September 2009.
  • Houser, D.R., “The Effect of Manufacturing Microgeometry Variations on the Load Distribution Factor and on Gear Contact and Root Stresses,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, San Antonio, TX, October 12-14 2008.
  • Bednarek, G., Kahraman, A., and Seetharaman, S., “Development of an Efficiency Model for Manual Transmissions,” VDI International Conference on Gears, VDI International Conference on Gears, Freidrichhafen, Germany, June 17-19 2008.
  • Kahraman, A., Seetharaman, S., Szweda, T., Kirchner, E., Olsson, M., and Bednarek, G., “Development of an Efficiency Model for Transmissions,” CTI Conference, CTI Conference, Berlin, Germany, December 2008.
  • Ligata, H., Kahraman, A., and Singh, A., “Influenza Degli Errori di Lavorazione Sui Carichi Nei Rotismi Epicicloidali,” Organi di Transmissione, Organi di Transmissione, November 2008.
  • Petry-Johnson, T., Kahraman, A., Anderson N.E., and Chase, D., “Experimental Investigation of Spur Gear Efficiency,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Las Vegas, NV, September 2008.
  • Rosander, P., Bednarek, G., Seethharaman, S., and Kahraman, A., “Entwicklung eines Wirkungsgrad-Modells fur Sahalltgetriebe,” Automobiltechnische Zeitschrift (ATZ), Automobiltechnische Zeitschrift (ATZ), April 2008.
  • Kahraman, A., Lim, J., and Ding, H., “A Dynamic Model of a Spur Gear Pair with Friction,” 12th IFToMM World Congress, 12th IFToMM World Congress, Besancon, France, June 18-21 2007.
  • Inalpolat, M. and Kahraman, A., “Free Vibration Analysis of Multi-Stage Planetary Gear Trains,” Inter-Noise, Inter-Noise, Istanbul, Turkey, August 28-31 2007.
  • Ligata. H., Kahraman, A., and Singh, A., “An Experimental Investigation of the Influence of Manufactruing Errors on the Planetary Gear Stresses and Load Sharing,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Las Vegas, NV, September 2007.
  • Houser, D.R, and Harianto, J., “A Methodology for Obtaining Optimum Gear Tooth Micro-Topographies for Noise and Stress Minimization Over a Broad Operating Torque Range,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Las Vegas, NV, September 2007.
  • Houser, D.R., Shon, S., and Harianto, J., “An Evaluation of FZG Micro-Pitting Test Procedures and Results for the Crowned AGMA Test Gears,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, Orlando, FL, 2006.
  • Anderson, N., Petry-Johnson, T., Chase, D., and Kahraman, A., “Effect of Surface Characteristics and Lubricants on Spur Gear Efficiency,” FISITA 2006 World Automotive Congress, FISITA 2006 World Automotive Congress, Yokohama, Japan, October 22-27 2006.
  • Espin, S., Perret-Liaudet, J. and Kahraman, A., “Etude Theoreque et Expermentale de la Resonance non Lineaire d’un Engrenage Droit Induite par le Jeu Entre Dents,” XV Collogue Vibrations Chocs et Bruit, XV Collogue Vibrations Chocs et Bruit, Ecully, France, June 2006.
  • Harianto, J., and Houser, D. R., “The Effect of Micro-Geometry and Load on Helical Gear Noise Excitations,” SAE Noise and Vibration Conference, SAE Noise and Vibration Conference, Traverse City, MI, 2005.
  • Xu, H.and Kahraman, A., “Prediction of Friction Power Losses of Hypoid Gear Pairs,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, Chicago, IL, 2005.
  • Xu, H., Kahraman, A., and Houser, D.R., “A Model to Predict Friction Losses of Hypoid Gears,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, Alexandria, USA, 2005.
  • Ding, H. and Kahraman, A., “Interactions between Gear Dynamic and Gear Wear,” 17th AIMeTA Congress of Theoretical and Applied Mechanics, 17th AIMeTA Congress of Theoretical and Applied Mechanics, Florence, Italy, September 11-15 2005.
  • Xu, H. and Kahraman, A., “A Frictional Efficiency Loss Model for Helical Gears,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Long Beach, CA, September 2005.
  • Tamminnana, V. K., Kahraman A., and Vijayakar, S., “On the Relationship Between the Dynamic Factors and Dynamic Transmission Error of Spur Gear Pairs,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Long Beach, CA, September 2005.
  • Harianto, J., and Houser, D.R., “The Effect of Profile Relied on the Noise Excitation of Helical Gear,” Gear Solutions Magazine, Gear Solutions Magazine, March 2005.
  • Bajpai, P., Kahraman, A., and Anderson, N.E., “Optimization of Gear Tooth Profiles for Minimized Wear,” STLE Annual Meeting, STLE Annual Meeting, Toronto, Canada, May 2004.
  • Colabawala, M., Sorenson, J., and Houser, D.R., “Experimental Procedure for Characterization of Gear Whine: Noise in a Variety of Vehicle Applications,” SAE Noise and Vibration Conference, SAE Noise and Vibration Conference, Traverse City, MI, 2003.
  • Uematsu, S., Lyu, S.K., Houser, D.R., Lim, J.S., and Lu, L., “A Study on Reducing the Gear Tooth Profile Error by Finish Roll Forming,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Chicago, IL, 2003.
  • Kartik, V., and Houser, D.R., “Analytical Predictions for the Transmission Error Excitation in Various Multiple-Mesh Gear-Trains,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Chicago, IL, 2003.
  • Eritenel, T., Houser, D.R., Vijayakar, S.M., and Casella, J.M., “Effect of Tooth Deflection and Corner Contact on Backside Separation (Backlash) of Gear Pairs,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Chicago, IL, 2003.
  • Chang, S., Houser, D.R., and Harianto, J., “Tooth Flank Corrections of Wide Face Width Helical Gears That Account for Shaft Deflections,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Chicago, IL, 2003.
  • Binney, D. A., Vinayak H., Gmirya Y., Zunski, L.M., Houser, D.R., and Ames, E.C., “Face Gear Transmission Development Program at Sikorsky Aircraft,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Chicago, IL, 2003.
  • Kubur, M., Kahraman, A., Zini, D., and Kienzle, K., “Dynamic Analysis of a Multi-shaft Helical Gear Transmission by Finite Elements,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Chicago, IL, September 2-6 2003.
  • Kahraman, A., Kienzle, K., and Zini, D., “A Generalized Formulation for Kinematic and Powerflow analysis of Automatic Transmission Planetary Gear Trains,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Chicago, IL, September 2-6 2003.
  • Bajpai, P., Kahraman, A., and Anderson, N. E., “A Surface Wear Model for Parallel Axis Gear Pairs,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Chicago, IL, September 2-6 2003.
  • Moraru, L., Keith, T.G., and Kahraman, A., “Aspect Regarding the Load Carrying Mechanisms in Lubricated, Rough Line Contacts,” STLE Annual Meeting, STLE Annual Meeting, New York, NY, April 2003.
  • Cioc, C., Cioc, S., Keith, T.G., and Kahraman, A., “A Deterministic Mixed Elastohydrodynamic Lubrication Model of High-Speed Rotorcraft Components,” STLE Annual Meeting, STLE Annual Meeting, New York, NY, April 2003.
  • Ueda, Y., and Houser, D.R., “Optimum Design and Manufacturing Robustness for Gear Whine of Helical Gear,” VDI International Conference on Gears, VDI International Conference on Gears, 2002.
  • Houser, D.R., Sorenson, J., Harianto, J., Wijaya, H., and Satyanarayanan, M., “Comparison of Analytical Predictions with Dynamic Noise and Vibration Measurements for a Simple Idler Gearbox,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, 2002.
  • Harianto, J., and Houser, D.R., “A Gear Design Optimization Procedure That Identifies Robust, Minimum Stress and Minimum Noise Gear Pair Designs,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, St. Louis, MO, October 20-22 2002.
  • Kahraman, A. and Wagaj, P., “Reduction Vibration Levels of Gear Systems via Optimization of Tooth profile Modifications,” 6th Biennial ASME Conference on Engineering Systems Design and Analysis, 6th Biennial ASME Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July 8-11 2002.
  • Kartik, V., Houser, D.R., and Sorenson, J. D., “Gear Noise Responses From a Variety of Applications  Modeling and Experimentation,” Inter-Noise, Inter-Noise, Dearborn, MI, August 2002.
  • Kahraman, A., “An Analytical and Experimental Study of Nonlinear Spur Gear Dynamics,” SFA Congress, SFA Congress, Paris, France, June 2002.
  • Cioc, C., Keith, T.G., and Kahraman, A., “A Deterministic Elastohydrodynamic Lubrication Model for High-Speed Transmission Components,” STLE Annual Meeting, STLE Annual Meeting, Houston, TX, May 2002.
  • Houser, D.R., Vaishya, M., and Sorenson, J., “An Experimental Investigation into Vibro-Acoustic Effects of Friction in Gear Meshes,” SAE Noise and Vibration Conference, SAE Noise and Vibration Conference, 2001.
  • Harianto, J., and Houser, D.R., “Manufacturing Robustness Analysis of the Noise Excitation and Design of Alternative Gear Sets,” SAE Noise and Vibration Conference, SAE Noise and Vibration Conference, 2001.
  • Harianto, J., and Houser, D.R., “Design Robustness and Its Effect on Transmission Error and Other Design Parameters,” International Conference on Mechanical Transmissions, International Conference on Mechanical Transmissions, China, 2001.
  • Houser, D., Wijaya H., and Harianto, J., “The Effect of Spacing Errors and Runout on Transverse Load Sharing and Dynamic Factor of Spur and Helical Gears,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, Detroit, MI, October 3-5 2001.
  • Kahraman, A. and Umrani, M., “An Investigation of Planetary Gear Dynamic Stress Factors as a Function of Gear Rim Thickness,” The India-USA Symposium on Emerging Trends in Vibration and Noise Engineering, The India-USA Symposium on Emerging Trends in Vibration and Noise Engineering, Columbus, OH, December 2001.
  • Houser, D. R., Sorenson, J., and Harianto, J., “Development of a Data Base for Transmission Noise Evaluation,” The India-USA Symposium on Emerging Trends in Vibration and Noise Engineering, The India-USA Symposium on Emerging Trends in Vibration and Noise Engineering, Columbus, OH, December 2001.
  • Ueda, Y., Houser, D.R., and Harianto, J., “The Effect of Manufacturing Errors on Gear Design Metrics Using a Robustness Scheme,” JSME International Conference - Motion and Power Transmission, JSME International Conference - Motion and Power Transmission, Fukuoka, Japan, November 2001.
  • Bodas, A. and Kahraman, A., “Influence Manufacturing Errors and Design Parameters on the Static Planet Load Sharing Behavior of Planetary Gear Sets,” International Motion and Power Transmission Conference, International Motion and Power Transmission Conference, Fukuoka, Japan, November 2001.
  • Phansalkar, S., Kahraman, A. and Anderson, N., “A Comparative Study of EHL Behavior of Smooth and Asperity Contacts of Helical Gears and Rollers,” STLE Annual Meeting, STLE Annual Meeting, Orlando, FL, May 2001.
  • Cioc, C., Moraru, L., Keith, T. and Kahraman, A., “An Integrated, Physics-Based Lubrication Analysis Methodology for Helicopter Transmission Gear Surfaces with Asperities,” Annual Meeting of the American Helicopter Society, Annual Meeting of the American Helicopter Society, Washington D.C., May 2001.
  • Hochmann, D., and Houser, D.R., “Friction Forces as a Dynamic Excitation Source in Involute Spur and Helical Gearing,” International Gearing Conference, International Gearing Conference, 2000.
  • Snow, C., Houser, D.R., and Luscher, A.F., “The Effect of Gating and Material on Measured Transmission Error and Noise of Injection Molded Gears,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Baltimore, MD, 2000.
  • Vaishya, M., and Houser, D.R., “Modeling and Analysis of Sliding Friction in Gear Dynamics,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Baltimore, MD, September 2000.
  • Kahraman, A. and Vijayakar, S., “Effect of Internal Gear Flexibility on the Quasi-static Behavior of a Planetary Gear Set,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Baltimore, MD, September 2000.
  • Houser, D. R., Harianto, J., Chandrasekaran, B., Josephson, J. R., and Iyer, N., “A Multi-Variable Approach to Determine the "Best" Gear Design,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Baltimore, MD, September 2000.
  • Houser, D.R., and Su, X., “Definition and Inspection of Profile and Lead of a Worm Wheel,” World Congress-Gear and Power Transmission, World Congress-Gear and Power Transmission, 1999.
  • Houser, D.R., Lim, T. C., Harianto, J., Sorenson, J. D., Myers, C. H., and Gordon, B.E., “Case History: Engine Timing Gear Noise Reduction,” SAE Noise and Vibration Conference, SAE Noise and Vibration Conference, 1999.
  • Dunn, A.L., Houser, D.R., and Lim, T. C., “Methods for Researching Gear Whine in Automotive Transaxles,” SAE Noise and Vibration Conference, SAE Noise and Vibration Conference, 1999.
  • Houser, D.R., Luscher, A.F., and Regalado, I., “The General Optimization of Cylindrical Gears Including Robustness,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, 1999.
  • Houser, D.R., Luscher, A. F., and Regalado, I. C., “The Multi-Objective Optimization of Nonstandard Gears Including Robustness,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, Denver, CO, October 1999.
  • Houser, D.R., Vaishya. M., and Su, X., “Effects of Wear on the Meshing Contact of Worm Gearing,” AGMA Fall Techincal Meeting, AGMA Fall Techincal Meeting, Denver, CO, October 1999.
  • Kahraman, A., “Static Load Sharing Characteristics of Transmission Planetary Gear Sets: Model and Experiment,” Transmission and Driveline Systems Symposium, SP-1440, Transmission and Driveline Systems Symposium, SP-1440, Detroit, MI, March 1999.
  • Harianto, J., and Houser, D.R., “A Method for Predicting the Dynamic Root Stresses of Helical Gear Teeth,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1998.
  • Su, X., and Houser, D.R., “Calculation of Wobble From Lead Inspection Data of Gear Teeth With Modifications,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Atlanta, GA, September 13-16 1998.
  • Singh, A., Houser, D.R., and Vijayakar, S., “Detecting Gear Tooth Breakage Using Acoustic Emission: A Feasibility and Sensor Placement Study,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Atlanta, GA, September 13-16 1998.
  • Regalado, I., and Houser, D.R., “Profile Modifications for Minimum Static Transmission Error in Cylindrical Gears,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Atlanta, GA, September 13-16 1998.
  • Kalluri, R., and Houser, D.R., “A Possible Strategy for Incorporating Edge Effects in Root Stress Estimation of Helical Gears,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Atlanta, GA, September 13-16 1998.
  • Lim, T. C., and Houser, D.R., “Dynamic Analysis of Layshaft Gears in Automotive Transmission,” SAE Noise and Vibration Conference, SAE Noise and Vibration Conference, 1997.
  • Houser, D.R., and Singh, R.S., “NVH Research Facilities at The Ohio State University: Existing Facilities and Envisioned Enhancements,” SAE Noise and Vibration Conference, SAE Noise and Vibration Conference, 1997.
  • Su, X., and Houser, D.R., “Coordinate Measurement and Reverse Engineernig of ZK Type Worm Gearing,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1997.
  • Liauwnardi, L., Luscher, A., and Houser, D.R., “Plastic Gear Transmission Error Measurements and Predictions,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1997.
  • Liauwnardi, L., Houser, D.R., and Luscher, A., “Measurements and Predictions of Plastic Gear Transmission Errors With Comparisons to the Measured Noise of Plastic and Steel Gears,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1997.
  • Dziech, A., and Houser, D.R., “Refinements in Root Stress Predictions for Edges of Helical Gear Teeth,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1997.
  • Houser, D.R., and Schroeder, G., “Dynamic Characterization of a Planetary Test Rig Using Modal Analysis,” SEM 14th International Modal Analysis Conference, SEM 14th International Modal Analysis Conference, Dearborn, MI, 1996.
  • Bolze, V.M., Houser, D.R., and Graber, J.M., “A Comparison of Predicted and Measured Dynamic and Static Transmission Error for Spur and Helical Gear Sets,” SEM 14th International Modal Analysis Conference, SEM 14th International Modal Analysis Conference, Dearborn, MI, 1996.
  • Börner, J., and Houser, D.R., “Influence of Friction and Bending Moments on Gear Noise Excitations,” SAE Noise and Vibration Conference, SAE Noise and Vibration Conference, 1996.
  • Prabhu, M. S., and Houser, D.R., “A Hybrid Finite Element Approach for Analyzing the Load Distribution and Transmission Error in Thin-Rimmed Gears,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, 1996.
  • Kahraman, A. and Blankenship, G.W., “Torsional Gear Pair Dynamics, Part-III: Effect of Involute Profile Modifications,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, San Diego, CA, 1996.
  • Kahraman, A. and Blankenship, G.W., “Torsional Gear Pair Dynamics, Part-II: Effect of Involute Contact Ratio,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, San Diego, CA, 1996.
  • Houser, D.R., Bolze, V.M., and Graber, J.M., “Static and Dynamic Transmission Error Measurements and Predictions for Spur and Helical Gear Sets,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, 1996.
  • Blankenship, G. W. and Kahraman, A., “Torsional Gear Pair Dynamics, Part-I: Characterization of Forced Response,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, San Diego, CA, 1996.
  • Börner, J., and Houser, D.R., “Dynamic Distribution of Load and Stress on External Involute Gearings,” AGMA Fall Techincal Meeting, AGMA Fall Techincal Meeting, 1996.
  • Celik, M., Houser, D.R., and Bilir, O. G., “Application of Boundary Elements to Thin-Rimmed Geometry of Spur Gears,” 7th International Machine Design and Production Conference, 7th International Machine Design and Production Conference, 1996.
  • Narayan, A., Houser, D.R., and Vijayakar, S., “Study of Effect of Machining Parameters on Performance of Worm Gears,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1995.
  • Harianto, J., and Houser, D.R., “The Effect of Manufacturing Errors on the Predicted Dynamic Factors of Spur Gears,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, Alexandria, USA, 1995.
  • Singh, A., and Houser, D.R., “Analysis of Off-Line of Action Contact at the Tips of Gear Teeth,” SAE Noise and Vibration Conference, SAE Noise and Vibration Conference, 1994.
  • Kahraman, A. and Blankenship, G.W., “Planet Mesh Phasing in Epicyclic Gear Sets,” International Gearing Conference, International Gearing Conference, Newcastle upon Tyne, 1994.
  • Hochmann, D., and Houser, D.R., “An Experimental Test Stand for Measurements on Loaded Parallel Axis Gears,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, 1994.
  • Blazakis, C., and Houser, D.R., “Finite Element and Experimental Analysis of the Effects of Thin Rimmed Gear Geometry on Spur Gear Fillet Stress,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, 1994.
  • Houser, D. R., Oswald, F.B., Valco, M.J., Drago, R.J., and Lenski, J.W., “Comparison of Transmission Error Predictions With Noise Measurements for Several Spur and Helical Gears,” AIAA Joint Propulsion Conference, AIAA Joint Propulsion Conference, 1994.
  • Clapper, M., and Houser, D.R., “A Boundary Element Procedure for Predicting Helical Gear Root Stresses and Load Distribution Factors,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1994.
  • Sundaresan, S., Ishii, K., and Houser, D.R., “Design of Helical Gears With Minimum Transmission Error Under Manufacturing and Operating Variances,” JSME International Conference - Motion and Power Transmission, JSME International Conference - Motion and Power Transmission, 1993.
  • Sundaresan, S., Ishii, K., and Houser, D.R., “A Robust Optimization Procedure With Variations on Design Variables and Constraints,” ASME Advances in Design Automation, ASME Advances in Design Automation, 1993.
  • Singh, R., and Houser, D.R., “Engineering Science Research Issues in High Power Density Transmission Dynamics for Aerospace Applications,” AIAA Joint Propulsion Conference, AIAA Joint Propulsion Conference, 1993.
  • Wheitner, J., Houser, D.R., and Blazakis, C.A., “Gear Tooth Bending Fatigue Crack Detection by Acoustic Emisions and Tooth Compliance Measurements,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1993.
  • Vaidyanathan, S., Busby, H.R., and Houser, D.R., “A Rayleigh-Ritz Approach to Determine Compliance and Root Stresses in Spiral Bevel Gears Using Shell Theory,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1993.
  • Thomas, J., and Houser, D.R., “A Procedure for Predicting the Load Distribution and Transmission Error Characteristics of Double Helical Gears,” World Congress-Gear and Power Transmission, World Congress-Gear and Power Transmission, 1992.
  • Rao, A., and Houser, D.R., “Studies on Helical Gear Blanks: Flexibility Effects on Surface Durability and Design Optimization,” USIF, USIF, 1992.
  • Caliskan, M. and Kahraman, A., “Analytical Study of Noise Generated by Rotating Textile Spindles,” Inter-Noise, Inter-Noise, Toronto, Canada, 1992.
  • Vinayak, H., and Houser, D.R., “A Comparison of Analytical Prediction With Experimental Measurements of Transmission Error of Misaligned Loaded Gears,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, 1992.
  • Kahraman, A., “Dynamic Analysis of a Multi-Mesh Helical Gear Train,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Phoenix, AZ, 1992.
  • Adjunta, J., and Houser, D.R., “A Study on the Shrinkage Characteristics and Dimensional Accuracy of Cast Gears,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, 1992.
  • Biggert, P., and Houser, D.R., “Gear Ghost Noise - A Case History Using Single Flank Transmission Error Measurements,” NOISE-CON, NOISE-CON, 1991.
  • Yau, E., Busby, H.R., and Houser, D.R., “A Rayleigh-Ritz Approach for Modeling the Bending and Shear Deflections of Gear Teeth,” JSME International Conference - Motion and Power Transmission, JSME International Conference - Motion and Power Transmission, 1991.
  • Kahraman, A., “Effect of Axial Vibrations on the Dynamics of a Helical Gear Pair,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Miami, FL, 1991.
  • Vijayakar, S. M., and Houser, D.R., “Contact Analysis of Gears Using a Combined Finite Element and Surface Integral Method,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1991.
  • Kahraman, A. and Singh, R., “Linear and Nonlinear Dynamic Models of Geared Rotor-bearing Systems,” The Eighth International Modal Analysis Conference, The Eighth International Modal Analysis Conference, Florida, 1990.
  • Kahraman, A. and Singh, R., “Routes to Chaos in a Geared System with Backlash,” The 120th Meeting of the Acoustical Society of America, The 120th Meeting of the Acoustical Society of America, San Diego, CA, 1990.
  • Agrawal, R., Sarkar, B., Kinzel, G., and Houser, D.R., “Optimal Design of Straight Bevel Gears,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1990.
  • Sundaresan, S., Ishii, K., and Houser, D.R., “A Procedure that Accounts for Manufacturing Errors in the Design Minimization of Transmission Error in Helical Gears,” AGMA Fall Techincal Meeting, AGMA Fall Techincal Meeting, 1990.
  • Houser, D.R., and Blankenship, G.W., “Methods for Measuring Gear Transmission Error Under Load and at Operating Speeds,” SAE Noise and Vibration Conference, SAE Noise and Vibration Conference, 1989.
  • Stegemiller, M.E., and Houser, D.R., “A Three Dimensional Analysis of the Base Flexibility of Gear Teeth,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, 1989.
  • Kahraman, A., Ozguven, H. N., Houser, D. R., and Zakrajsek, J. J., “Dynamic Analysis of Geared Rotors by Finite Elements,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Chicago, IL, 1989.
  • Kahraman, A. and Singh, R., “Effect of Mean Load on the Nonlinear Behavior of a Spur Gear Noise Source,” Inter-Noise, Inter-Noise, Newport Beach, CA, December 1989.
  • Vijayakar, S. M., Houser, D.R., and Busby, H.R., “A Summary of New Finite Element Techniques With Special Applications to Gears,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, 1988.
  • Blankenship, G.W., Houser, D.R., and Carriere, D.L., “Development of a Variable Center Distance Gear Noise Test Facility,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1988.
  • Vijayakar, S.M., Sarkar, B., and Houser, D.R., “Gear Tooth Profile Determination From Arbitrary Rack Geometry,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1987.
  • Ozguven, H.N., and Houser, D.R., “Gear Dynamic Models Used in Noise Analysis,” NOISE-CON, NOISE-CON, State College, PA, June 8-10 1987.
  • Houser, D.R., Linzell, S., and Previte, T., “Factors Which Affect Shifting Rate of a Rubber Belt Continuously Variable Transmission,” World Congress-Gear and Power Transmission, World Congress-Gear and Power Transmission, 1986.
  • Kahraman, A. and Caliskan M., “Sound Radiation from Textile Ring-spinning Spindles with Mass Unbalance,” The 12th International Conference on Acoustics, The 12th International Conference on Acoustics, Toronto, Canada, 1986.
  • Kahraman, A. and Caliskan M., “Dynamics of Textile Spinning Spindles and Rotors,” International Rotordynamics Conference, International Rotordynamics Conference, Tokyo, Japan, 1986.
  • Vijayakar, S., and Houser, D.R., “The Use of Boundary Element for the Determination of the Geometry Factor,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1986.
  • Pape, D.B., and Houser, D.R., “Signal Processing for the Detection of Gear Manufacturing Discrepancies,” NOISE-CON, NOISE-CON, Columbus, OH, 1985.
  • Yakubek, D., Busby, H.R., and Houser, D.R., “Three-Dimensional Deflection Analysis of Gear Teeth Using Both Finite Element Analysis and a Tapered Plate Approximation,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1985.
  • Busby, H.R., and Houser, D.R., “Plate Bending and Finite Element Analysis of Spur and Helical Gear Tooth Deflection,” AGMA Fall Techincal Meeting, AGMA Fall Techincal Meeting, 1985.
  • Zaremsky, G.J., Singh, R., and Houser, D.R., “Modal Analysis of a Gear Housing Plate Using Acoustic Intensity Measurements,” 2nd International Modal Analysis Conference, 2nd International Modal Analysis Conference, 1984.
  • Tavakoli, M.S., and Houser, D.R., “Optimum Profile Modifications for the Minimization of Static Transmission Errors of Spur Gears,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, Cambridge, MA, October 7-10 1984.
  • Clapper, M.L., and Houser, D.R., “Prediction of Fully Reversed Stresses at the Base of the Root in Spur and Double Helical Gears in a Split Torque Helicopter Transmission,” Rotary Wing Propulsion Specialists' Meeting, Rotary Wing Propulsion Specialists' Meeting, 1983.
  • Houser, D.R., and Smigel, R., “Gear Load Distribution and Transmission Error Modeling,” AGMA Fall Technical Meeting, AGMA Fall Technical Meeting, 1983.
  • Singh, R., Kinzel, G.L., and Houser, D.R., “Gear Noise Modeling,” Inter-Noise, Inter-Noise, Miami, FL, December 1980.
  • Houser, D.R., “Basis for Spectral Analysis,” 5th National Council Canada Turbine Seminar, 5th National Council Canada Turbine Seminar, 1978.
  • Drosjack, M.J., and Houser, D.R., “An Experimental and Theoretical Study of the Effects of Simulated Pitch Line Pitting on the Vibration of a Geared System,” ASME Power Transmission and Gearing Conference, ASME Power Transmission and Gearing Conference, 1977.
  • Houser, D.R., Drosjack, M.J., and Hogg, G.W., “Vibration Diagnostics in Helicopter Power Trains,” AGARD Conference, AGARD Conference, 1974.
  • Houser, D.R., and Drosjack, M.J., “Vibration Signal Analysis Techniques for Detecting Condition of Gears and Bearings in Helicopter Power Train [Final Report],” AD-776397/USAAMRDL-TR-73-101, AD-776397/USAAMRDL-TR-73-101, Columbus, OH, 1973.